Fixed: Netgear Router Default IP Not Working

By Oscarjack 5 Min Read

Are you facing an issue with your Netgear router as you are not able to access the Netgear router login page due to the default IP not working issue? If yes, then don’t panic. Here we have arrived with some basic troubleshooting techniques through which you can easily resolve the Netgear router default IP not working issue. Just have a quick view at the below section.

Troubleshooting Solutions

Perform a Restart

In some cases, minor technical hiccups can be the reason why you are confronting the Netgear router default IP not working issue. And this issue, you can simply resolve by restarting your Netgear router before implementing any other troubleshooting technique. By restarting your Netgear router, you will free up the accumulated spaces of the processor and also boost its speed. Apart from it, restarting your router prevents it from getting overheated. So, without any delay, let’s start with the restart process.

  • Remove all the devices accessing your Netgear router.
  • Then, unplug your Netgear router from the power socket and switch it off.
  • Now, put it aside for a while before reconnecting it to the power socket and turning it on.

You can now check if the Netgear default IP not working issue has been fixed. If not, then continue reading.

Verify Your IP address

Check that you are using the correct default IP i.e. 192.168.1.1 to access the Netgear router login page. In most scenarios, users accidentally insert an incorrect IP address and experience the default IP not working issue. So, it is recommended that you always cross-check the IP address you’ve entered in the address bar before hitting the enter button. Apart from it, always use the address bar rather than the browser search bar to access the Netgear router login page. Else, you might face an error.

See also  The Ultimate Guide- Router Or Mi-Fi- Which One Is The Best?

Check Your Ethernet Connection

Verify the Ethernet cable you are using to establish a connection between your networking devices. Sometimes, you might encounter the issue due to an old or worn-out Ethernet cable. In that case, you are required to replace or swap the cable with the new one in order to resolve the issue. After doing this, if you are still getting an issue, then try using a wireless connection to access the Netgear router setup wizard.

Avoid WiFi Interference

Avoid positioning your Netgear router close to the object such as refrigerators, microwaves, cordless phones, baby monitors, and other smart home appliances causing WiFi interference. These kinds of objects use radio frequency, which can disrupt the WiFi signals resulting in the Netgear router default IP not working issue.

Reset Your Netgear Router

Sometimes incomplete or incorrect Netgear router setup can also lead you to face the Netgear router default IP not working issue. In that case, perform the default factory reset of your Netgear router and re-configure it from scratch. This is the final technique you need to implement if all the efforts went in vain in fixing the Netgear router default IP not working issue. Although, it’s not a tough job; still, many netizens especially from the non-technical background get stranded while resetting their Netgear routers. If you are also having a hard time, then follow the instructions mentioned below and make your task simple.

  • You need to look for the Reset button situated on your router.
  • Once the Reset button has been identified, push it.
  • Then, it will restart on its own and will be restored to the default factory settings.
See also  The Many Positive Aspects Of Evaporative Cooling

Now, configure it again using the default username and password.

Update Netgear Router Firmware

Using an old version of the Netgear router firmware can also become the reason behind the outcome of this specific issue. So, ensure that you are using an updated version of the Netgear router. If not, then update the Netgear router firmware to its latest version to avoid this or a similar kind of issue.

Hopefully, the aforementioned steps will definitely help you in fixing the Netgear router default IP not working issue. If you are aware of any other way to troubleshoot the default IP not working issue, then let us know via the comment section.

Share This Article
Follow:
Contact Us: zainliaquat10@gmail.com WhatsApp Number: +923024670115