INTRODUCTION
Is your Samsung dryer causing your frustration by turning on but refusing to spin? Don’t worry, this comprehensive guide will help you understand the common causes behind this issue and provide easy-to-follow solutions to get your dryer back into action.
We’ll break it down in a simple human-friendly way so you can resolve the problem quickly.
Unfortunately, if your dryer is not spinning it usually means that service is required. There is one quick test to perform to make sure that the cycle is being started correctly. And of course, make sure it is not something as simple as Child Lock.
Troubleshooting and Simple Solutions
Child Lock is on
Cause:
Sometimes the Child Lock feature can be accidentally turned on preventing your dryer from starting.
Solution:
Press and hold the two buttons above the Child Lock label for about 3 seconds or until the smiling icon on the dryer display screen disappears.
Error Code
Cause:
If your dryer displays an error code it is trying to communicate a specific issue.
Solution:
Look for flashing letters or numbers on the display screen and refer to your manual for the corresponding solution.
Insufficient Power or Voltage
Cause:
Inadequate power or voltage can lead to your dryer not spinning properly.
Solution:
Check the dryer power cord for loose or damaged wiring. If it is connected to an extension cord move it to a separate circuit to ensure it receives sufficient electrical power.
Door Switch Malfunction
Cause:
A faulty door switch can prevent the dryer from starting.
Solution:
Unplug the dryer and carefully unscrew the door assembly to check the door switch for loose or damaged wiring.
Broken Drive Belt
Cause:
A broken or loose drive belt can impede drum rotation.
Solution:
Unplug the dryer and try to spin the drum by hand. If it turns easily the belt is either loose or broken. In this case you’ll need to disassemble the dryer to replace the broken drive belt.
Broken Idler Pulley
Cause:
A damaged idler pulley can disrupt the drums rotation.
Solution:
Unplug the dryer, disassemble the panels to access the drum and inspect the idler pulley at the back. If it doesn’t spin easily on its shaft replace it.
Broken Drum Roller and Axle
Cause:
Damaged drum rollers and axles can hinder drum rotation.
Solution:
Unplug the dryer disassemble the top and front panel to access the drum. Remove the driver belt and turn the drum by hand. If the drum has difficulty turning, check the rollers and their axles for damage.
Worn Out Drum Bearing
Cause:
A worn out drum bearing can lead to squeaking or grinding noises and difficulty turning the drum.
Solution:
Unplug the dryer, remove the top and front panels to access the drum. Remove the driver belt and turn the drum by hand. If you hear unusual noises and have difficulty turning the drum check the drum bearing for damage.
Damaged Drum Glide
Cause:
Worn or damaged drum glides can affect the drum rotation.
Solution:
Unplug the dryer and remove the front bulkhead to access the drum glides. Check the glides for wear and damage and replace them if necessary.
Drive Motor Failure
Cause:
A malfunctioning drive motor can prevent the drum from spinning.
Solution:
Unplug the dryer and disassemble its panels to access the drive motor and blower wheel. Check the blower wheel for blockages and clean it as necessary. Inspect the motor for any damage and replace it if needed.
Troubleshooting Summary
| Cause | Solution |
| Child Lock Activated | Press and hold buttons above Child Lock for 3 seconds. |
| Code Error | Refer to manual for corresponding solution. |
| Insufficient Power or Voltage | Check the power cord and ensure proper voltage. |
| Door Switch Malfunction | Inspect door switch for loose or damaged wiring. |
| Broken Drive Belt | Replace the driving belt. |
| Broken Idler Pulley | Replace the damaged idler pulley. |
| Broken Drum Roller and Axle | Inspect rollers and axles; replace them if damaged. |
| Worn Out Drum Bearing | Replace the worn-out drum bearing. |
| Damaged Drum Glide | Replace worn or damaged drum glides. |
| Drive Motor Failure | Check for blockages, clean blower wheel and replace motor. |
Common Questions Answer
Q: Are Samsung dryers known for their quality and durability?
A: Yes, Samsung dryers are recognized for their sturdy build and long-lasting performance making them a trusted choice for many consumers.
Q: How can I check if the Child Lock is activated on my Samsung dryer?
A: Look for the Child Lock label on your dryer control panel. If it is activated pressing and holding the two buttons above it for 3 seconds will deactivate it.
Q: What should I do if my Samsung dryer displays an error code?
A: Check your dryer manual for the corresponding solution to the displayed error code. It will guide you on how to resolve the issue.
Q: Can an extension cord affect my dryer’s performance?
A: Yes, using an extension cord may lead to insufficient power. To ensure your dryer receives adequate electrical power plug it into a separate circuit.
Q: How can I inspect the drive belt on my Samsung dryer for damage?
A: Unplug the dryer disassemble it to access the drum and manually attempt to spin the drum. If it turns easily the drive belt may be loose or broken and you should replace it.
Feature Table: Samsung Dryer Features
| Feature | Price Range | Quality and Durability |
| Advanced Drying Cycles | Affordable to Premium | Sturdy Build |
| Energy Efficiency | Varies with Model | Long lasting Performance |
| User-Friendly Controls | Budget-friendly to | Trusted Brand |
| Premium | Reliable Components | |
| Smart Connectivity | Warranty and Support |
Conclusion
When your Samsung dryer turns on but does not spin it can be frustrating, but the good news is that most issues can be resolved with the right troubleshooting steps.
By identifying the cause and following the appropriate solution, you can get your dryer back to working efficiently.
